Hammer™ is a hard disk drive erasure tool. The device will securely erase all data
written to the attached drives, up to 4 drives at once. Both PATA and SATA interfaces are supported.
SCSI version available also!
Native Secure Erase Support
IT professionals are familiar with the power of SECURE ERASE. Once started, SECURE ERASE will complete,
even if interrupted by disconnecting power.
If the process is interrupted, simply restart Hammer™ for SECURE ERASE
to complete. Once SECURE ERASE has been initiated, the drive is not
usable until it completes. If the drive is connected to a host system
before the SECURE ERASE finishes, the host will not recognize the
drive, thereby keeping prying eyes away from any remaining user data.
In the event an attached drive
does not support the secure erase command, your data will be completely
overwritten by automatically calling the embedded version of CPR Tools'
award winning BangDisk™ utility. This ensures compliance with NIST
800-88 and 800-36 guidelines for data 'clearing'.
Combining ease and security is what
Hammer™ is all about. Not to mention that your hardware investment
isn't lost each time you destroy data. With The
Hammer™, the data's gone and the drive can be put back into service immediately.
FEATURES:
- ATA SECURE ERASE
- Pattern Erase - Features embedded BangDisk™
- Auto Partitioning
- Auto Formatting
- Auto Image Copy
- Up to Four Drives at a time! (2 PATA, 2 SATA)
Another unique feature of Hammer™
- 4.0 GB / Minute
- Meets or exceeds data elimination requirements of:
- HIPAA (Health Insurance Portability and Accountability Act)
- Gramm-Leach-Bliley Act (GLBA)
|
- NV RAM on Board for Audit Trail
-
NIST 800-88 Compliant
-
NIST 800-36 Compliant
- Native, High Speed UDMA transfers are supported!
- Verify after complete
- Portable - Hammer™ is just at home in the field as in the lab.
- Provides a host PC connection via USB 2.0 for storing and printing verification logs
|
Download the
Hammer™ User Guide
